Navigation bar
  Start Previous page  62 of 76  Next page End Home  

PRELIMINARY CHECKING PROCEDURE
CHECK TRANS OIL LEVEL
SEE PAGE 56
CHECK OUTSIDE MANUAL LINKAGE AND CORRECT SEE PAGE 56
CHECK ENGINE TUNE
CAUTION: TOTAL RUNNING
TIME FOR THIS COMBINATION
NOT TO EXCEED 2 MINUTES.
INSTALL OIL PRESSURE GAGE
CONNECT VACUUM GAGE TO MODULATOR LINE & TACHOMETER TO ENGINE
CHECK OIL PRESSURES IN FOLLOWING MANNER
RANGE
OIL PRESSURE
NORMAL P.S.I.
DRIVE--BRAKES APPLIED
60 TO 90
ENGINE AT 1000 RPM
L2 OR L1--BRAKES APPLIED
85 TO 110
ENGINE AT 1000 RPM
REVERSE- BRAKES APPLIED
85 TO 150
ENGINE AT 1000 RPM
NEUTRAL- BRAKES APPLIED
55 TO 70
ENGINE AT 1000 RPM
DRIVE IDLE
SET ENGINE IDLE TO
60 TO 85
SPECIFICATIONS
DRIVE--30 MPH
55 TO 70
CLOSED THROTTLE OR ON HOIST*
*THE DRIVE-30 MPH CLOSED THROTTLE PRESSURE READING MAY BE TAKEN DURING A ROAD TEST OR:
1. VEHICLE ON HOIST-DRIVING WHEELS OFF GROUND, FOOT OFF BRAKE, IN DRIVE RANGE.
2. ENGINE 2000 RPM.
3. CLOSE THROTTLE (FOOT OFF ACCELERATOR) AND TAKE PRESSURE READING AT 30 MPH.
NOTE: WITH CLOSED THROTTLE AND DRIVING WHEELS OFF THE GROUND, ENGINE RPM WILL DROP RAPIDLY.
PRESSURE READING MUST BE TAKEN WITHIN RPM'S INDICATED AND WITH CLOSED THROTTLE.
Previous page Top Next page